Control system 9010/9020 SIL

9010 / 9020SIL Controllers with LCD Display

The 9010/9020 SIL Gas Monitor offers maximum flexibility, simple operation and high reliability. Key features

• Independent control of up to 20 input channels
• 19 ' ' rack or wall mountable (one or two channels)
• Works with a wide range of MSA sensors
• Large LCD and LED indicators provide information on gas concentration, alarm status, and more.
• RS 485 Modbus RTU, Ethernet for Modbus TCP
• Surface Mount Electronic Board Components
• Selection of measurement units: LEL, LEL, PPM, vol.%, G / m3
• Receiving a signal from passive (mV) or active (4-20 mA) sensors
• Built-in self-diagnosis
• Easy system configuration

Features and Benefits

• Equipment safety class for hardware SIL 2 / for software SIL 3
• Tested and certified in accordance with the ATEX directive and TR CU 012/2011
• Certified in accordance with the current Technical Regulations for Low Voltage Equipment and Electromagnetic Compatibility!
  • Enhanced safety functions, suitable for SIL 2/3 applications
• Improved menu navigation (extra ESC key) and additional trouble codes
  • Simplifies controller parameter setting
  • Error and error messages on the display
• One hardware configuration for all analyzers (universal platform)
  • Universal platform allows you to use a wide range of analyzers
  • Suitable for gas detection in a variety of applications
• Configuration via the front panel menu
  • Time saving for initial configuration and setup
• Compatibility: existing systems can be expanded with the SIL version
  • 1: 1 replacement of the previous 9010/9020 LCD controller module
• New universal power supply with improved power distribution
  • Allows installation of two IR analyzers on one 9020 module
• Independent LCD
  • The logical independence of the modules makes the 9010/9020 extremely economical
  • Ideal for small installations
• Device' s own website (read function)
  • The ability to quickly check the configuration
• RS485 for Modbus RTU
  • The most used gas detection device in the industry

Features and Benefits (Wall Mount)

• Ethernet for Modbus TCP
  • Ability to connect to the company network
• IP65 (wall mount enclosure)
  • Increased resistance to dust and moisture increases the number of possible applications
• Perforated cable glands (optional cable glands (M20) can be ordered)
  • No need to drill holes in the housing
  • Easy and fast cable installation

Plug-in gas analyzers

MSA passive catalytic and electrochemical gas analyzers can also be connected but are no longer supported.

Details

• 9010/9020 SIL 19 ' ' rack mount
• 9010/9020 SIL with wall mounting

For each controller module, we offer a customized version, which will be adjusted in our factory according to your specific requests.

Calibration certificate attached in local language (German, French, Spanish, Italian, Dutch, Portuguese, Russian, Czech, Polish, Hungarian, Romanian, Bulgarian, Croatian, Kazakh).

Ordering Information

Certification

• 2014/34 / EU ATEX with function (EN 60079-29-1, EN 50104, EN 50271)
• Functional safety for SIL 2 (IEC 61508, EN 50402), (HW for SIL 2, FW for SIL 3)
• EMC Directive 2014/30 / EU, (EN 50270: 2015-10 type 2, EN 61000-6-4: 2007-09)
• Low Voltage Directive 2014/35 / EU, (EN 61010-1: 2011-07)
• Subsequent certifications:
  • Russia / Kazakhstan, North America and Canada (FM, cFM), China (CCCF)

Summary

• Improvement of the previous controller 9010/9020
• Provides higher safety, current version meets SIL 2
• Offers a highly economical gas detection system, operates with one or two independent channels
• Improved menu navigation
• Compatible with previous model

Additional materials: Booklet .