Vapor pressure analyzer RVP-4

Vapor pressure analyzer RVP-4

Цена по запросу

В наличии


Explosion-proof INLINE analyzer RVP-4 determines the vapor pressure of oil products, hydrocarbons, chemical products and individual components automatically in real time.

After complete rinsing, the measuring cell is filled with product. The product is cooled for a preprogrammed time required for settling. During cooling, the measuring cell tilts in 3 ° C steps (another step can be programmed). As soon as the IR sensor detects movement on the surface of the product (sensitivity is programmable), the measuring cell moves back to the vertical position. If, after the cell is in a horizontal position, no movement is detected, the measuring cell remains in this position for 5 seconds. If no movement is detected again after this, the temperature determined for the previous slope will be stored as pour point. The measuring cell then heats up, is rinsed and the next cycle starts. If, after the cell is in a horizontal position, no movement is detected, the measuring cell remains in this position for 5 seconds. If no movement is detected again after this, the temperature determined for the previous slope will be stored as pour point. The measuring cell is then heated up, rinsed and the next cycle started.

In the meantime, there is no need to know about it. ”

Technical Specifications

Metrological

  • Measured parameters: pour point.
  • Sample type: diesel fuel, gas oil, oils.
  • Compliance with standards: ASTM D97.
  • Measurement range: -30… + 33º С.
  • Accuracy: in accordance with MVI.
  • Measurement cycle time: 15– 90 min.

Operational

  • Explosion protection: EExdpe [ia] IIBT4 + H2.
  • Sample temperature: 30… 50 ° C.
  • Sample pressure and flow rate: 1 ... 3 atm, 20 ... 40 l / h.
  • Signal outputs: 4-20 mA, RS485 / RS422, Modbus.
  • Power supply: ~ 220/240 V, 50 Hz, 1700 W.
  • Technological support: coolant from a closed circulation cooling system; instrumentation air - 2– 5 atm, 1 m³ / h.
  • Method and conditions of installation: installation on a frame, operation at an ambient temperature of 5… 40º С, protection class IP 54.
  • Management: built-in PC with Windows XP and PACS software or from a remote station.
  • Dimensions and weight: 1140 × 1900 × 710, 420 kg.

Have questions?

Similar equipment:

Flow refractometer UR-X1

Flow refractometer UR-X1

UR-X1
Цена по запросу
More details
Color Analyzer CM-100

Color Analyzer CM-100

CM-100
Цена по запросу
More details
Analyzer of fractional composition DPA-4.5

Analyzer of fractional composition DPA-4.5

DPA-4.5
Цена по запросу
More details
Flow viscometer XL-7

Flow viscometer XL-7

XL-7
Цена по запросу
More details

You might also be interested in:

Model S-11 For viscous and particulate media

Model S-11 For viscous and particulate media

WIKAS-11
Цена по запросу
More details
[an error occurred while processing the directive]