Flow Density Meter FD900

Technical Specifications

Metrological

• Measured parameters: density.
• Sample type: gasoline, diesel fuel, oil products, crude oil.
• Measurement range: 0-2100 kg / m3.
• Accuracy: ± 0.1 kg / m3.
• Measurement cycle time: continuous.
• Included in the State Register of SI RF No. 19879-06.

Operational

• Explosion protection: 2Exd [ia] IICT4 / T6.
• Certificate of Conformity No. ROSS.US.C.31.A25313.
• Permission for use No. РРС 00-30580.
• Sample temperature: (-50)… + 180º C.
• Sample pressure and flow rate: 0– 300 l / min, 1– 30 atm.
• Signal outputs: 4-20 mA or frequency.
• Power supply: 24 V DC, 25 mA.
• Additional security: not required.
• Method and conditions of installation: installation directly on the " quick loop" on the flange 1 " ANSI, operation at ambient temperature (-20) ... + 60 ° С, protection class IP65.
• Management: local display.
• Dimensions and weight: 590 × 390 × 290, 5.5 kg.

The device consists of a housing with connecting flanges made of stainless steel and an explosion-proof measuring electronic unit. The measuring principle is based on the operation of a resonant vibration U-shaped sensor placed directly into the sample stream.