In-line analyzer AquaTOS-FL

In-line analyzer AquaTOS-FL

Brand name: TOC Technologies

Цена по запросу

В наличии


Designed for continuous determination of traces of oil, petroleum products, polycyclic aromatic hydrocarbons, phenol, BTX fractions, etc. in water.

APPLICATIONS:

  • Quality control of circulating water of petrochemical and oil refining enterprises;
  • Household and industrial wastewater treatment plants;
  • Installations for the purification of produced water.

MEASURING RANGE:
0.001-1000 mg / l

The measuring principle is based on the property of aromatic hydrocarbons to absorb radiation at a certain wavelength and emit light in a longer wavelength range - to fluoresce. This allows the selective determination of aromatic hydrocarbons, as well as the determination of the total content of trace amounts of oil or hydrocarbon fractions, provided the composition of the pollutant is constant.

The light emitted by the source, after passing through the measuring cell, is fixed by a highly sensitive photomultiplier. The reference photosensor compensates for fluctuations in the intensity of the light source. A water temperature sensor is installed for automatic temperature compensation.

ADVANTAGES COMPARED TO SUBMERSIBLE SENSORS:

  • Possibility of two-stream analysis;
  • Simple maintenance that does not require special skills;
  • The influence of chlorides on accuracy is excluded;
  • Automatic calibration, checking the correctness of readings, flushing;
  • Wide measuring range using the built-in dilution module.

SPECIFICATIONS

Method: UV - fluorescence
Measurement interval: Programmable, minimum 10 seconds.
Error: 10% of full scale
Repeatability +/- 0.1 mg / l
Effect of Chlorides on Accuracy NOT
Application of reagents NOT
Nutrition: 110-220 VAC, 50-60 Hz, 80 Volt-Amp.
Mounting: Wall or pole mounting
Protection class: IР54
Housing: Cold rolled epoxy powder coated steel
Dimensions: 380x600x210 mm (LxHxW)
Weight: Approx. 20 kg
Access settings: Two levels of password access
Output signals: 4-20 mA, RS232 / 485
4 programmable relays (signal on failure, on
, no flow 1, no flow 2,
exceeding the preset concentration value, etc.)
Data storage: Built-in recorder with USB port
Automatic functions: Calibration, validation, cleaning

Sample requirements:

Temperature: 5-80 ° C
Filtration: Not required
Sample inlet pressure: Atmospheric (extraction from an external reservoir)
Sample outlet pressure: Atmospheric (drain to drain)
Sample feed rate
into fast loop reservoir:
100-500 ml / min
Connecting dimensions: Sample to the tank inlet with quick loop - flexible tubing 6 mm OD, drain tubing 12 mm OD

Have questions?

Similar equipment:

In-line analyzer Aquatos UIK

In-line analyzer Aquatos UIK

TOC TechnologiesAquatos UIK
Цена по запросу
More details
In-line analyzer AquaTOS-K

In-line analyzer AquaTOS-K

TOC TechnologiesAquaTOS-K
Цена по запросу
More details
In-line analyzer AquaTOS-UV-254

In-line analyzer AquaTOS-UV-254

TOC TechnologiesAquaTOS-UV-254
Цена по запросу
More details
TECHNOTOS series flow analyzers of oil and oil products in water

TECHNOTOS series flow analyzers of oil and oil products in water

TOC TechnologiesTECHNOTOS series flow analyzers of oil and oil products in water
Цена по запросу
More details

You might also be interested in:

Model S-11 For viscous and particulate media

Model S-11 For viscous and particulate media

WIKAS-11
Цена по запросу
More details
[an error occurred while processing the directive]