EcoBox block container

Instrument block-container, insulated to accommodate analytical equipment.

Installation in an open area. Frame construction, all-welded frame painted with oil-resistant epoxy paint.

External enclosing structures of walls and ceilings are made of sandwich-type panels, wall thickness is 100 mm. On the outside and inside, the wall panels are made of painted carbon steel. The floor is covered with corrugated aluminum sheet.

The doors have a cold-resistant rubber seal around the entire perimeter. Also, the door is equipped with a viewing window and an anti-panic opening system.

There are mounting lugs on the roof of the block container. Grounding bus along the inner perimeter of the block-container walls, 2 grounding points are brought out.

• Climatic modification: UHL1 (from -60 C to +60 C).
• Protection degree: IP65 (without passive ventilation).
• Standard dimensions:
• Width (mm): 2400.
• Height (mm): 2950.
• Depth (mm): 4000.

Additional options (all equipment used in explosion-proof design):

• Electric and gas penetrations.
• Inserts in the load-bearing frame at the places where heavy equipment is installed.
• Clamping plates for fixing the block container and HVAC system to the foundation.
• Heating, ventilation, air conditioning (HVAC) system.
• Lamps for outdoor and indoor lighting with switches;
• Power supply and analytical systems control panels.
• Fire alarm with light and sound alerts.
• Gas level sensors with light and sound notification in case of alarm.
• Cable tray inside the block container.
• Blocks of cable glands.