FLOW WATER QUALITY ANALYZER " EkoTOS"
The EkoTOS in-line analyzer is a combined measuring system designed for continuous automatic determination of the content and analysis of several water quality parameters simultaneously,
MEASURED PARAMETERS:
MEASUREMENT RANGE:
The measurement process takes less than 3 minutes. This speed guarantees high-quality detection of even the smallest jump in the measured value.
The EkoTOS analyzer can be made in an explosion-proof housing for use in potentially explosive zones of various industries.
ADVANTAGES COMPARED TO SUBMERSIBLE SENSORS:
Complete combustion method (combustion temperature 1200 ° С);
Accurate measurement results without the use of reagents and catalysts;
Digital input | 3 digital inputs for remote control |
Data transfer | RS232 |
Measurement type / response time | USB 2.0 |
Display: | 10.4 " resistive touch TFT display with trackball |
Carrier gas consumption, l / h | thirty |
Reagents | Rinse water in a 5 liter container Phosphoric acid (HZPO4) in a 5 liter container Hydrochloric acid (HCl) solution in a 5 liter container |
Air preparation system (optional) | Cabinet for reagents soda lime granules in a 1 l bottle activated carbon and soda lime in a 1 l bottle |
External air supply (optional) (Purge system) | Dew point: min. -5 ° and lower to -60 ° С Residual TOC content: 5 ppm in the measuring range 0.1 ... 200 mg / l С 20 ppm in the measuring range 5 ... 4000 mg / l С300 ppm in the measuring range 100 ... 50,000 mg / l С |
Maximum noise level | 70 dB |
Environmental conditions and equipment location | |
Temperature, ° С | > 5, max. 35 |
Humidity,% | < = 80 |
Instrument rack (WxHG), mm | 1000 x 2000 x 815 mm, rack weight: 65 kg |
Mounting dimensions (WxHxD), mm | 670 x 1800 x 550 mm |
Dimensions of the FlowSampler® sampling system (optional) | Intake system FlowSampler for 1 flow: 400 x 500 x 120 mm FlowSampler intake system for two streams: 400 x 500 x 240 mm |